| 年度 | 论文名称 |
|---|---|
| 2021 | 郑琇云(Jeng Shiou-Yun)、林君维(Chun-Wei Remen Lin)、曾明朗(Ming-Lang Tseng)、Korbkul Jantarakolica、Raymond Tan, Resource Efficiency Improvement: Zero Waste Discharge Planning in a Pulp-and-Paper Firm under Uncertainties, Management of Environmental Quality：An International Journal, vol.32 no.3 pp.646-664, 2021 |
| 2021 | 曾明朗(Ming-Lang Tseng)、林君维(Chun-Wei Remen Lin)、Raditia Sujanto、Ming K. Lim、BUI TAT DAT, Assessing sustainable consumption in packaged food in Indonesia: corporate communication drives consumer perception and behavior, Sustainability, vol.13 no.14 pp.1-22, 2021 |
| 2021 | ?玉涓(PARNG YUH JIUAN)、Taufik Kurrahman、Chih-Cheng Chen、曾明朗(Ming-Lang Tseng)、Minh Ha、林君维(Chun-Wei Remen Lin), Visualizing the hierarchical sustainable human resource management under qualitative information and complex interrelationships, Management of Environmental Quality：An International Journal, vol.32 no.6 pp.1422-1447, 2021 |
| 2021 | 曾明朗(Ming-Lang Tseng)、郑琇云(Jeng Shiou-Yun)、林君维(Chun-Wei Remen Lin)、Ming K. Lim, Recycled Construction and Demolition Waste Material: a Cost–Benefit Analysis under Uncertainty, Management of Environmental Quality：An International Journal, vol.32 no.3 pp.665-680, 2021 |
| 2020 | 曾明朗(Ming-Lang Tseng)*、Chia-Hao Chang、林君维(Chun-Wei Remen Lin)、Tran Thai Ha Nguyen、Ming K. Lim, Environmental responsibility drives board structure and financial and governance performance: A cause and effect model with qualitative information, JOURNAL OF CLEANER PRODUCTION, vol.258 pp.1-13, 2020 |
| 2020 | Jining Zhou、Bo Zhang、Runhua Tan、曾明朗(Ming-Lang Tseng)*、林君维(Chun-Wei Remen Lin)、Ming K. Lim, Using Neighborhood Rough Set Theory to Address the Smart Elderly Care in Multi-Level Attribute, Symmetry-Basel, vol.12 no.2 pp.1-25, 2020 |
| 2020 | 曾明朗(Ming-Lang Tseng)*、Chia-Hao Chang、林君维(Chun-Wei Remen Lin)、K.J. Wu、Q. Chen、L. Xia、B. Xue, Future trends and guidance for the triple bottom line toward sustainability: a data driven bibliometric analysis, ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2020 |
| 2020 | 林君维(Chun-Wei Remen Lin)、Min-Tsung Chen、曾明朗(Ming-Lang Tseng)*、周纯峰(Shun Fung Chiu)、Mohd Helmi, Profit maximization for waste furniture recycled in Taiwan using cradle-to-cradle production programming, MATHEMATICAL PROBLEMS IN ENGINEERING, vol.20 pp.1-15, 2020 |
| 2020 | 林君维(Chun-Wei Remen Lin)、Min Tsung Chen、曾明朗(Ming-Lang Tseng)*、Tatre Jantarakolica、Helen Xu, Multi-Objective Production Programming to Systematic Sorting and Remanufacturing in Second-Hand Clothing Recycling Industry, Symmetry-Basel, vol.12 no.1161 pp.1-22, 2020 |
| 2020 | 曾明朗(Ming-Lang Tseng)、Phan Anh Tan、Kuo-Jui Wu、林君维(Chun-Wei Remen Lin)、Nitcha Todumrongkul、Patrapapar Juladacha、Gabriella Christianti, Sustainable Total Resource Management in Thailand Healthcare Industry under Uncertain Situations, Sustainability, vol.12 no.22 pp.9611-9634, 2020 |
| 2019 | 郑琇云(Shiou-Yun Jeng)、林君维(Chun-Wei Remen Lin)、曾明朗(Ming-Lang Tseng)*、Tartre Jantarakolica, Cradle-to-cradle zero discharge production planning system for the pulp and paper industry using a fuzzy hybrid optimization model, Management of Environmental Quality: An International Journal, vol.31 no.3 pp.645-663, 2019 |
| 2019 | 曾明朗(Ming-Lang Tseng)*、Phan Anh Tan、Shiou-Yun Jeng、林君维(Chun-Wei Remen Lin)、耶利纳(Yeneneh Tamirat Negash)、Susilo Nur Aji Cokro Darsono, Sustainable Investment: Interrelated among Corporate Governance, Economic Performance and Market Risks Using Investor Preference Approach, Sustainability, vol.11 no.7 pp.1-15, 2019 |
| 2019 | 林君维(Chun-Wei Remen Lin)、郑琇云(Shiou-Yun Jeng)、曾明朗(Ming-Lang Tseng)*、Wai Peng Wong, Sustainable development for zero-wastewater-discharge reproduction planning under quantitative and qualitative information, Management of Environmental Quality: An International Journal, vol.30 no.5 pp.1114-1131, 2019 |
| 2019 | 曾明朗(Ming-Lang Tseng)*、Chia-Hao Chang、Kuo-Jui Wu、林君维(Chun-Wei Remen Lin)、Bhuripan Kalnaovkul、Raymond R. Tan, Sustainable Agritourism in Thailand: Modeling Business Performance and Environmental Sustainability under Uncertainty, Sustainability, vol.11 no.15 pp.4087-4107, 2019 |
| 2019 | 曾明朗(Ming-Lang Tseng)*、Chunyi Lin、林君维(Chun-Wei Remen Lin)、Kuo-Jui Wu、Thitima Sriphon, Ecotourism development in Thailand: Community participation leads to the value of attractions using linguistic preferences, JOURNAL OF CLEANER PRODUCTION, vol.231 pp.1319-1329, 2019 |
| 2018 | 林君维(Chun-Wei Remen Lin)、郑琇云(Shiou-Yun Jeng)、曾明朗(Ming-Lang Tseng)*、Raymond Tan, A cradle-to-cradle analysis in the toner cartridge supply chain using fuzzy recycling production approach, Management of Environmental Quality: An International Journal, vol.30 no.2 pp.329-345, 2018 |
| 2018 | 林君维(Chun-Wei Remen Lin)、厐玉涓(PARNG YUH JIUAN)*、陈昱霖(Yu-Lin Chen), Profit Optimization of Sustainable Low-to-Medium Temperature Waste Heat Recovering Management, INDUSTRIAL MANAGEMENT & DATA SYSTEMS, vol.118 no.2 pp.463-479, 2018 |
| 2018 | 林君维(Chun-Wei Remen Lin)*、?玉涓(PARNG YUH JIUAN), A Minimum Machining Cost Approach for Automated Tolerance Assignment in Concentricity Control, International Journal of Materials, Mechanics and Manufacturing, vol.6 no.2 pp.104-108, 2018 |
| 2017 | 郑琇云(Shiou-Yun Jeng)、林君维(Chun-Wei Lin)*, Fuzzy cradle to cradle remanufacturing planning for a recycled toner cartridge industry, International Journal of Industrial and Systems Engineering, vol.25 no.4 pp.423-442, 2017 |
| 2016 | 刘正雄(Cheng Hsiung Liu)*、林君维(Chun-Wei Remen Lin), Comparative TOPSIS of Speed Analysis for the Crypto Algorithm Establishment, Research Journal of Applied Science, vol.11 no.11 pp.1324-1327, 2016 |
| 2016 | 刘正雄(Cheng Hsiung Liu)*、林君维(Chun-Wei Remen Lin), The Comparison of the AHP TOPSIS analysis applied for the Commercialization Military Aircraft Logistic Maintenance Establishment, International Business Management, vol.10 no.4 pp.6428-6432, 2016 |
| 2015 | 林君维(Chun-Wei Lin)*、厐玉涓(PARNG YUH JIUAN)、Shiou-Ching Gao, An Improved Happiness-Based Scheduling for Nurse Shifts Planning, The Journal of MacroTrends in Health and Medicine, vol.3 no.1 pp.168-175, 2015 |
| 2015 | 林君维(Chun-Wei Lin)*、Oliver L. Hung、厐玉涓(PARNG YUH JIUAN)、Chia-Heng Chang, Fuzzy Recycle Planning For The Green Supply Chain Management, International Journal of Mechanical And Production Engineering, vol.8 no.3 pp.150-153, 2015 |
| 2014 | 林君维(Chun-Wei Lin)*、厐玉涓(PARNG YUH JIUAN)、江荣杰(Jung-Jye Jiang), A Dynamic Simulation Approach for Flexible Manufacturing System Design, Applied Mechanics and Materials, vol.635 pp.1813-1818, 2014 |
| 2013 | 林君维(Chun-Wei Lin)*、许圣杰(Sheng-Jie J. Hsu), Decision Support for the Global Logistics Positioning, INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRA, vol.20 no.5-6 pp.339-371, 2013 |
| 2011 | 吴沂綎(E-Ting Wu)*、林君维(Chun-Wei Lin), The Optimization of Procurement Strategy in Project Management: A Case Study of a Health Food Regional Company, Journal of Humanities and Social Sciences(人文与社会科学学报), vol.7 no.2 pp.51-65, 2011 |
| 2011 | 林其春(Chi-Chung Lin)*、林君维(Chun-Wei Lin), Defective Item Inventory Model with Remanufacturing or Replenishing in an Integrated Supply Chain, International Journal of Integrated Supply Management, vol.6 no.3/4 pp.254-269, 2011 |
| 2011 | 林君维(Chun-Wei Lin)、Hsiau, Hsian-Jong(Hsiau, Hsian-Jong)*, Using an Efficient New Gene for Genetic Algorithm to Solve the Multi-Buyer Joint Replenishment Problem, Contemporary Management Research, vol.07 no.4 pp.313-328, 2011 |
| 2010 | 林君维(Chun-Wei Lin)、Hsiau, Hsian-Jong(Hsiau, Hsian-Jong)*, A Genetic Algorithm Approach for Optimizing Chemical Tower Construction Project Scheduling with Dynamic Resources Constraints, INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE, vol.17 no.2 pp.128-141, 2010 |
| 2010 | 林君维(Chun-Wei Lin)、Hsiau, Hsian-Jong(Hsiau, Hsian-Jong)*、Yang, N.S, An Approximate Scheduling Policy for Joint Replenishment Problem, 工业工程学刊／Journal of the Chinese Institute of Industrial Engineers, vol.27 no.4 pp.316-330, 2010 |
| 2009 | 林君维(Lin, Chun-Wei)*、Lin, Kuo-Hui、Hsu, Sheng-Jie J, Integration of Order Picking Process and Strategic Management of Distribution Path in a Distribution Center, Journal of Advanced Engineering(先进工程学刊), vol.4 no.3 pp.223-228, 2009 |
| 2009 | 林君维(Chun-Wei Lin)、Hsiau, Hsian-Jong(Hsiau, Hsian-Jong)*, A Fuzzy PERT Approach to Evaluate Plant Construction Project Scheduling Risk under Uncertain Resources Capacity, Journal of Industrial Engineering and Management, vol.2 no.1 pp.31-47, 2009 |
| 2009 | 萧献忠(Hsiau, Hsian-Jong)*、林君维(Chun-Wei Lin), An Optimal Supply Policy for Multi-product Multi-retailer Using Simulated Annealing Method, International Journal of Business and Management, vol.4 no.12 pp.91-98, 2009 |
| 2008 | 林君维(Chun-Wei Lin)*、Hsu, Sheng-Jie J.、Yang, Nang-Shu B, Study of the Provision Fitness for the Professional Logistics Specialties in Taiwan, Logistics Management Review(运筹管理评论), vol.3 no.1 pp.15-34, 2008 |
| 2008 | 林君维(Chun-Wei Lin)*、Chen, Chien-Kuang、Chen, Fei-Long, A Synchronized Modeling Approach for Strategic and Operational Planning, 工业工程学刊／Journal of the Chinese Institute of Industrial Engineers, vol.25 no.3 pp.187-203, 2008 |
| 2007 | 陈宏益(Chen, Hong-Yi)、林君维(Chun-Wei Lin)*、Yih, Yuehwern, Production-distribution network design of a global supply chain alliance from the key player’s perspective, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, vol.45 no.2 pp.245-265, 2007 |
| 2006 | 林君维(Chun-Wei Lin)*、Hung, Oliver L、Chen, Chelun, A Strategic Quick Response Approach for Dynamic Supply Chain Management of Perishable Goods, INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRA, vol.13 no.4 pp.374-383, 2006 |
| 2006 | 林君维(Chun-Wei Lin)*、Wong, Yen-Ching、Hung, Oliver L., Workflow Oriented Information Integration for the Integrated Manufacturing and Commercial Environment – A Case Study of IMCC at NYUST, Commerce & Management Quarterly, vol.7 no.1 pp.189-217, 2006 |
| 2006 | 林君维(Chun-Wei Lin)*、Taso, Yue-Zen, Dynamic Availability-Oriented Control of the Automated Storage/Retrieval System – A Computer Integrated Manufacturing Perspective, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.29 no.9-10 pp.948-961, 2006 |
| 2005 | 张嘉恒(Chang, Chia-Heng)、Su, Chwen-Tzeng、林君维(Chun-Wei Lin)*, Inventory Modeling Simulation of the Green Supply Chain, Industrial Forum (产业论坛), vol.7 no.1 pp.45-69, 2005 |
| 2004 | 林君维(Chun-Wei Lin)*、Chen, Hong-Yi S., A Fuzzy Strategic Alliance Selection Framework for Supply Chain Partnering under Limited Evaluation Resources, COMPUTERS IN INDUSTRY, vol.55 pp.159-179, 2004 |
| 2003 | 林君维(Chun-Wei Lin)*、Chen, Hong-Yi、Xiao, Qing-Shun, Dynamic Integrated Process Planning and Scheduling, 工业工程学刊／Journal of the Chinese Institute of Industrial Engineers, vol.18 no.2 pp.21-32, 2003 |
| 2003 | 林君维(Chun-Wei Lin)*、Chen, Hong-Yi S., Dynamic Allocation of Uncertain Supply for the Perishable Commodity Supply Chain”, International Journal of Production Research, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, vol.41 no.13 pp.3119-3138, 2003 |
| 2000 | 林君维(Chun-Wei Lin)*, A Production-Efficiency Oriented Approach for Evaluating the Performance of a Local Area Network, 工业工程学刊／Journal of the Chinese Institute of Industrial Engineers, vol.17 no.2 pp.199-212, 2000 |
| 2000 | 林君维(Chun-Wei Lin)*, Alternative Shop Floor Control of a Flexible Manufacturing System – A Temporal Rescheduling Approach, INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE, vol.7 no.2 pp.168-178, 2000 |
| 1999 | 林君维(Chun-Wei Lin)*, A Study of Professional Requirements and Curriculum Configuration for Technological and Vocational Education Automation, Journal of Technology, vol.14 no.1 pp.13-22, 1999 |
| 1999 | 林君维(Chun-Wei Lin)*, A Study of the Order Feasibility Evaluation Decision Support System Based on the Fuzzy Concurrent Engineering Architecture, Journal of Technology, vol.44 no.1 pp.131-163, 1999 |
| 1998 | 林君维(Chun-Wei Lin)*, Dynamic Distribution Planning for an Automated distribution Center with Limited-Life Commodities, Journal of Commercial Modernization (商业现代化学刊), vol.1 no.1 pp.63-82, 1998 |
| 1998 | 林君维(Chun-Wei Lin)*, Availability-oriented Real-time Scheduling of a Flexible Manufacturing System, 工业工程学刊／Journal of the Chinese Institute of Industrial Engineers, vol.15 no.1 pp.45-56, 1998 |
| 1996 | 林君维(Chun-Wei Lin)*, Automated Orientation and Location Tolerances Control for High Precision Assembly Process Planning, Journal of Science and Technology(科技学刊), vol.5 no.1 pp.1-16, 1996 |
| 1996 | 林君维(Chun-Wei Lin)*, A Flow-Time-Based Approach for Parallel Production Scheduling, Journal of Science and Technology(科技学刊), vol.5 no.2 pp.19-34, 1996 |
| 年度 | 书名 |
|---|---|
| 2009 | 2008 Taiwan Logistics Yearbook, Green Logistics-New Challenge under the Sustainable Development, Department of Commerce, Ministry of Economic Affairs, Jan. 2009 |
| 2007 | 林君维(Chun-Wei Lin), Strategic Logistics Management (Chinese Edition)(运筹管理), McGraw-hill Education Taiwan, Jan. 2007 |
| 2006 | 林君维(Chun-Wei Lin), Principles of Integrating Manufacturing and Commerce(in Chinese, 制商整合原理), Huw-Tai Publishing Co., Taipei, Taiwan, Jan. 2006 |
| 2003 | 林君维(Chun-Wei Lin), 2003 Taiwan Logistics Yearbook, International Logistics Strategy in ASEAN (Association of the Southeast Asian Nations), Department of Commerce, Ministry of Economic Affairs, Jan. 2003 |
| 2002 | 林君维(Chun-Wei Lin), 2001 Taiwan Logistics Yearbook, Logistics Cost Analysis for the Consumer Communication Product Industry, Department of Commerce, Ministry of Economic Affairs, Jan. 2002 |
| 发表日期 | 论文名称 |
|---|---|
| 2019.03 | 潘静萱、林君维(Chun-Wei Remen Lin), 整合云端APP与物联网技术以提升农产物流 集运效率与品质监测 , 2019资讯科技与实务研讨会, Mar. 2019, 中华民国/台北市 |
| 2018.11 | 林君维(Chun-Wei Remen Lin)、Azhar, Andi、 Chen, Hui-Chuan、Lin, Wen-Hsin, The Last, Mile Logistics Integrity for Halal Food Supply Chain Management in Taiwan - 2018 International Conference on Resource Sustainability - Asia Pacific, Nov. 2018, Taichung, Taiwan, ROC |
| 2018.11 | Chang, Chia-Hao、林君维(Chun-Wei Remen Lin)、Lin, Sheng-Kun、?玉涓(PARNG YUH JIUAN), Suppliers Performance Rating under the Framework of ISO/TS, 16949 - 2018 International Conference on Resource Sustainability - Asia Pacific, Nov. 2018, Taichung, Taiwan, ROC |
| 2018.06 | Tuan, Hai Nguyen、林君维(Chun-Wei Remen Lin), Consumer behavior driven models to improve waste mobile phone recycling , 2018 International Forum on Arts, Humanities and Social Sciences (FAHSS), Jun. 2018, Ho Chi Minh City, Vietnam |
| 2018.05 | Chang, Chia-Hao、林君维(Chun-Wei Remen Lin)、Hsu, Wan-Yu, Multi, objective reproduction planning for used clothes recycling industry - The 23rd International Society for Business Innovation and Technology Management Conference on Production, Innovation, and Circular Economy (23ISBITM2018), May. 2018, Cebu, Philippines |
| 2017.12 | Ha, Le Thi Thanh、林君维(Chun-Wei Remen Lin), The Strategic Business Model for Big C Supermarket in Vietnam , The 311th International Conferences on Economics and Social Sciences (ICESS 2017), Dec. 2017, Taipei, Taiwan |
| 2017.05 | Ramiaji Kusumawardhana、林君维(Chun-Wei Remen Lin), Understanding Indonesia’s Economic Growth: A Solow Model Growth Theory Approach , 2017 7th International Conference on Education, Humanities and Social Sciences Studies, May. 2017, Pattaya, Thailand |
| 2017.05 | Andi Azhar、林君维(Chun-Wei Remen Lin), DETERMINING BUSINESS MODEL FOR INDONESIA MOBILE OPERATORS TO REACH THE GROWING EMERGING MARKET IN INTERNET PREPAID CARD USER , 2017 International Conference on E-Business and Internet (ICEBI 2017), May. 2017, Taichung, Taiwan |
| 2017.04 | Chien-Van Pham、林君维(Chun-Wei Remen Lin), Organizational Challenges to the Development of Convenience Store Chains in Vietnam , 2017 3rd IEEE International Conference on Information Management, Apr. 2017, Chengdu, China |
| 2017.04 | Andi Azhar、林君维(Chun-Wei Remen Lin), The Fundamental Business Strategy for State Owned Mobile Provider Company Enter the Regional Market Community , 2017 3rd IEEE International Conference on Information Management, Apr. 2017, Chengdu, China |
| 2017.03 | 沈孟君(Susan Shen)、林君维(Chun-Wei Remen Lin), Every Private Elementary School in Taiwan Needs Innovative Elements in its Business Model , 2017 International Conference on Education, Humanities and Management (ICEHM-17), Mar. 2017, Dubai, UAE |
| 2017.01 | 林君维(Chun-Wei Remen Lin)、厐玉涓(PARNG YUH JIUAN), A Minimum Machining Cost Approach for Automated Tolerance Assignment in Concentricity Control , 2017 International Conference on Manufacturing Technologies (ICMT 2017), Jan. 2017, San Diego, CA, USA |
| 2016.12 | Comparative Analysis of Environmental Impact Assessment for TOPSIS Application on Refuse Incineration Plant , 18th International Conference on Engineering & Technology, Computer, Basic & Applied Sciences, (ECBA- 2016), Dec. 2016, Hong Kong |
| 2016.06 | 林禹安、林君维(Chun-Wei Remen Lin), 整合预防保养与生产排程之研究 , 2016经营管理暨资讯科技研讨会, Jun. 2016, 国立高雄师范大学和平校区, 高雄, 台湾 |
| 2016.06 | 徐婉瑜、林君维(Chun-Wei Remen Lin), 旧衣回收产业之再利用率最大化再制分类生产规划 , 2016经营管理暨资讯科技研讨会, Jun. 2016, 国立高雄师范大学和平校区, 高雄, 台湾 |
| 2016.06 | 张元榛、林君维(Chun-Wei Remen Lin), 考量不良品下生产排程之重工策略研究 , 2016经营管理暨资讯科技研讨会, Jun. 2016, 国立高雄师范大学和平校区, 高雄, 台湾 |
| 2016.06 | 李昀叡、林君维(Chun-Wei Lin), 结合车辆途程规划与灰色预测使运输成本最小化, 以桶装瓦斯产业为例 - 2016经营管理暨资讯科技研讨会, Jun. 2016, 国立高雄师范大学和平校区，高雄，台湾 |
| 2016.06 | 刘韦辰、林君维(Chun-Wei Lin), 时窗限制之多厂区多产品最佳生产指派 , 2016经营管理暨资讯科技研讨会, Jun. 2016, 国立高雄师范大学和平校区，高雄，台湾 |
| 2016.06 | 张雯婷、林君维(Chun-Wei Lin), 探讨台湾海运承揽运送业之冷冻柜并柜风险管理 , 2016经营管理暨资讯科技研讨会, Jun. 2016, 国立高雄师范大学和平校区，高雄，台湾 |
| 2014.07 | 林君维(Chun-Wei Lin)、厐玉涓(PARNG YUH JIUAN)、江荣杰(Jung-Jye Jiang), A dynamic simulation approach for flexible manufacturing system design , 2014 4th International Conference on Advanced Design and Manufacturing Engineering, Jul. 2014, Hangzhou, China |
| Microcomputer Aided Tolerance Chart for Squareness and Concentricity, Detroit | |
| Generating Alternative Computer Aided Process Plans, Atlanta, GA | |
| A Systematic Analysis of Composite Machine Flexibility in a Flexible Manufacturing System, San Francisco, CA | |
| Scheduling for Machining in a Nonidentical Parallel Machine Manufacturing Environment, Washington, D.C. | |
| Efficient Planning of Machining Processes for a Parallel Machine Manufacturing Environment, Cookville | |
| A Flexibility-Based Approach for Measuring the Manufacturing System Performance, Los Angeles | |
| An Integrated Approach for the Workstation Flexibility Evaluation, Newark, NJ | |
| Real-Time Control for the Automated Storage/Retrieval System, Tainan, Taiwan, R.O.C. | |
| Realization of the Concurrent Engineering Management, Touliu, Taiwan | |
| Integration of Professional Curriculum for the Business Related Departments of the Technological and Vocational Education, Touliu, Taiwan | |
| Intelligent Machine Design with Object-Oriented Design and Constraints Satisfaction Mechanism, Taipei, Taiwan | |
| A Comprehensive Evaluation for the Machine and System Flexibilities, Singapore | |
| Availability-Oriented Real Time Control of A Flexibility Manufacturing System, Tainan, Taiwan, R.O.C. | |
| Local Area Network Evaluation: A Production Performance Perspective, Tainan, Taiwan, R.O.C. | |
| Application of Taguchi Method in Product Design and Process Planning, Taipei, Taiwan | |
| Application of Concurrent Engineering Management in Product Design, Taipei, Taiwan | |
| Applicability Study and Long-tem Planning of the Manufacturing Management Curriculum for the Technological and Vocational Education, Tainan, Taiwan | |
| Dynamic Distribution Planning of a Logistics Center, Chong-Li, Taiwan | |
| A Decision Support System for the Perishable Commodity Inventory Management of a Super Market, Chong-Li, Taiwan | |
| Dynamic Distribution for Perishable Commodities, Shinchuan, Taiwan | |
| PDS: A Parallel Dynamic Scheduler for a Flexible Manufacturing System, Hsinchu, Taiwan, R.O.C | |
| A Near-Optimal Method for Dynamic Design of a Flexible Manufacturing System, Singapore | |
| Quick Response Distribution System for the Perishable Commodities, Taipei, Taiwan | |
| Collaborative Distribution System Planning for Logistics Industries in the Central Taiwan, Taichung, Taiwan | |
| A Genetic Algorithm Approach for the Quick Response Distribution System, Kaoshong, Taiwan | |
| Application of Fuzzy Concurrent Engineering in Order Acceptability Decision Making, Kaoshong, Taiwan | |
| The Feasibility Analysis of Incorporating Commercial Modernization Topics in the Standard Curriculum of the Technological and Vocational High School, Touliu, Taiwan | |
| The Control of a CALS System for the Supply-Distribution Strategic Alliance, Touliu, Taiwan | |
| Transshipment Decision Making for a Regional Integrated Logistics Center, Touliu, Taiwan | |
| 1998 General Survey and Analysis of the Logistics Industry in Taiwan, Touliu, Taiwan | |
| Implementing the Collaborative Logistics System in Taiwan, Touliu, Taiwan | |
| Dynamic Integrated Production Control System, Changhua, Taiwan | |
| Facility Design and Planning for the Commercial Automation Center in National Yunlin University of Science and Technology, Taipei, Taiwan | |
| Automated Transshipment Control for a Logistics Center, Chayi, Taiwan | |
| Application of CALS in Supply Chain Management, Chayi, Taiwan | |
| Human Resource Investigation of the Integration of Manufacturing and Commerce Professionals- A View from the Supply of Human Resource, Hsinchu, Taiwan | |
| Dynamic Dispatching and Routing Planning of a Distribution Center, Hsinchu, Taiwan | |
| The Supply and Distribution Planning for the Perishable Commodity in a Distribution Center with Limited Resources, Hsinchu, Taiwan | |
| Quick-Response System for the Supply and Distribution Control of a Strategic Supply Chain Alliance, Hsinchu, Taiwan | |
| The Feasibility Study of a Collaborative Logistics Center for the Small Breakfast Restaurant in the Taichung Metropolitan, Taipei, Taiwan | |
| Simulation Analysis of Manpower and Channel Assignment for the Package Sorting Machine, Touliu, Taiwan | |
| Logistics Development Investigation for the Consumer Communication Industry in Taiwan, Touliu, Taiwan | |
| Frozen Food Logistics and Supply Chain Management, Touliu, Taiwan | |
| Automated Logistics Center Planning in Practice, Touliu, Taiwan | |
| Planning of the Logistics System for Internet Commerce, Touliu, Taiwan | |
| An Electronic Label-Controlled Automated Picking System, Touliu, Taiwan | |
| Supply Chain Management for the Pharmaceutical Industry, Touliu, Taiwan | |
| Vehicle Planning for a Transshipment Center, Touliu, Taiwan | |
| A Dynamic Response System for Commodity Flow Control in the Supply Chain Management, Hsin-Chu, Taiwan | |
| Availability-Oriented Real-time Dispatching and Routing Planning System, Yunlin, Taiwan | |
| Vehicle Scheduling for a Transshipment Center, Touliu, Taiwan | |
| Simulation of the Sorting Island Planning for a Transshipment Center, Touliu, Taiwan | |
| Information Management Based on Electronic Virtual Organization Concept: A Case Study of a Multi-national Concrete Products Manufacturer in APEC Member Economies, Hsin-Chu | |
| Express Home Delivery Planning for a Transshipment Center, Touliu, Taiwan | |
| Capacity Planning for a Transshipment Center, Touliu, Taiwan | |
| Dynamic Vehicle Dispatching for an Integrated Distribution and After-Sales Logistics Service Problem, Kaoshong, Taiwan | |
| Dynamic Emergency Medical Resource Distribution in the Disaster Area, Kaoshong, Taiwan | |
| Express Delivery Planning for a Transshipment Center, Kaoshong, Taiwan | |
| Dynamic Integration of Process Planning and Scheduling, Chia-Yi, Taiwan | |
| Building a customized hierarchical framework for evaluating supply chains, Taipei, Taiwan | |
| Development of the Regional Logistic System in ASEAN – a Case Study for a Taiwanese Pharmaceutical Company, Touliu, Taiwan | |
| Planning and Implementation of the Regional Logistic and Supply Chain Management System in the ASEAN Free-trade Area for Yong-Shing Pharmaceutical Industries (Malaysia) SDN, BHD, Brunei Darussalam | |
| Internationalization of the Taiwanese Technological and Vocational Education – 2003 Taiwan Higher and Professional Education Fair, Taipei, Taiwan | |
| Inventory Modeling of the Green Supply Chain, Taipe | |
| The Fuzzy Competitiveness Analysis for the Commercialization of Military Aircraft Maintenance in Domestic Aerospace Industry－A Case Study of Aerospace Industrial Development Corporation, Penghu, Taiwan | |
| Fuzzy Analysis for the Environmental Impact Factor Evaluation based on Air, Water, Waste, and Noise – a Recycle Plant Case Study, Taichung, Taiwan | |
| Investigation of Implementing the Customer Relationship Management Model for the Hypermarket, Taichung, Taiwan | |
| Application of RFID in the Management of the 3C Retail Industry”, Proceedings of the 1st Conference of the Taiwan Operations Research Institute and the 2004 Technological and Management Conference, Taipei, Taiwan | |
| Integrated Fuzzy Recycle and Production Planning for the Green Supply Chain, Tainan, Taiwan | |
| A Fuzzy PERT Approach in Controlling the Makespan Risk in the Factory Construction Project, Tainan, Taiwan | |
| A Strategic Quick Response Approach for Dynamic Supply Chain Management of Perishable Goods, Hong Kong Baptist University, Hong Kong | |
| A Design of Production-Distribution Network with Modular Design Product to Enhance the Partnership in the Global Supply Chain, Mandarin Oriental Hotel, Manila, Philippines | |
| Applying the Predictive Modeling Control Method to Improve the Bullwhip Effect in the Supply Chain, Hsinchu, Taiwan | |
| Fuzzy Vehicle Dispatching of the Diversified-Service Distribution Hub, Taipei, Taiwan, R.O.C. | |
| Environmental Impact and e-Business Study of the Sea Transportation Industry, Taichung, Taiwan | |
| Green Quality Function Development with Environmental Awareness Considerations, Taichung, Taiwan | |
| Storage Planning of a Military Automated Logistics Center – A Case Study, Taipei County, Taiwan | |
| Production Competitiveness Analysis of Domestic Nonalcoholic Beverage Industry, Taipei County, Taiwan | |
| A Fuzzy PERT Approach for Managing the Petroleum Chemical Plant Construction Project, Tokyo, Japan | |
| Passenger demand Forecast of the Taiwan Railway administration, Kaohsiung, Taiwan | |
| An efficient Algorithm for Solving the Multi-Buyer Joint replenishment Problem, Kaohsiung, Taiwan | |
| Strategic Policy Review of the Nurse Practitioners Licensure System in Taiwan, Taichung, Taiwan | |
| Investigation of KSF in Global Logistics -- Taiwan's Perspective, Seoul, Korea | |
| Using an Efficient New Gene for Genetic Algorithm to Solve the Multi-buyer Joint Replenishment Problem, Seoul, Korea | |
| A Distribution Model of Epidemic Prevention Goods in Epidemic Prevention Network of the Infectious Diseases--a Case Study of Severe Acute Respiratory Syndrome, Chongli, Taiwan | |
| Integration of Order Picking Process and Strategic Management of Distribution Path in Distribution Center, Chongli, Taiwan | |
| A Neuro-Fuzzy Globalization Evaluation Model for the International Logistic Industry, 南华大学，嘉义, 台湾 | |
| The Model of the Selection and Distribution of Retails with Product Power Foundation, Taipei County, Taiwan | |
| Considering Reliability to Integrate Preventive Maintenance and Production Scheduling for a Single Machine Environment, Taipei County, Taiwan | |
| Optimal Multi-Mode Multi-Type Resource Allocation Policy for Construction Project, Kuala Lumpur, Malaysia | |
| 忙里偷閒自行车趣之快乐体验, 国立中央大学，中坜市，台湾 | |
| 公共自行车租借站之设施区位问题研究, 国立中央大学，中坜市，台湾 | |
| 从交期、品质、弹性观点探讨外包供应商之评选, 大同大学，台北市，台湾 | |
| 物流中心重建规划案－以中部地区某物流业为例, 逢甲大学，中坜市，台湾 | |
| A Fuzzy-Nuro Performance Evaluation Model for the International Logistic Companies, Cebu, Philippines | |
| 灾区紧急救援物资之机动配送研究, 国立联合大学, 苗栗，台湾 | |
| 探讨利润最大化下之有机蔬菜生产规划研究, 国立联合大学, 苗栗，台湾 | |
| 玉米碳足迹试算模式之建立-以云林某有机农场为例, 国立勤益科技大学，台中，台湾 | |
| Upstream Production Scheduling Considering Supplier’s Dynamic Serviceability, Melaka - Malaysia | |
| 整合Kano二维模式与品质机能展开法于服务品质之研究-以车辆安全审验中心为例, 东海大学，台中，台湾 | |
| 航空工业导入RFID技术之关键成功因素研究, 东海大学，台中，台湾 | |
| 全球运筹管理与仓库位址设立-以某家不锈钢公司为例, 东海大学，台中，台湾 | |
| 健保药局联合物流中心-以云林县为例, 东海大学，台中，台湾 | |
| 应用资料探勘技术于健检数据库的顾客关系管理, 东海大学，台中，台湾 | |
| 社区性农产物流中心评选规划之研究, 南台科技大学, 台南，台湾 | |
| 根据 大型供应链 AHP , 建立完成度评估准则, 南台科技大学, 台南，台湾 | |
| KSF for Production Bases Positioning in Global Logistics Management -- Taiwan's Perspective, 环球科技科技大学, 云林，台湾 | |
| 应用资料探勘技术于健检数据库的顾客关系管理, 国立台北大学, 台北，台湾 | |
| 探讨利润最大化之封闭性养猪生产规划, 台湾科技大学, 台北, 台湾 | |
| 公共汽车捷运站设置问题之研究-以台中市为例, 台湾科技大学, 台北, 台湾 | |
| 考量碳权交易机制下非等效平行机台排程问题之研究, 台湾科技大学, 台北, 台湾 | |
| 再生碳粉匣C2C 再制计画之研究, 新科技大学, 新竹，台湾 | |
| 考虑瓶颈机台与稳健度的生产排程, 义守大学, 高雄，台湾 | |
| 无线射频辨识系统(RFID)运用于货柜保全与即时巡逻TSP 规划之研究, 国立台中科技大学, 台中，台湾 | |
| 以利润为目标探讨C2C柳橙汁产业链生产规划之研究, 静宜大学, 台中, 台湾 | |
| 以永续角度探讨自给率最大化之粮食供给策略, 静宜大学, 台中, 台湾 | |
| 考量利润及污染之多目标区域型厨馀回收再利用规划, 静宜大学, 台中, 台湾 | |
| C201应用SVM分类技术于健检后续之定期追踪决策分析, 静宜大学, 台中, 台湾 |
| 计画名称 | 参与人 | 计画期间 |
|---|---|---|
| 王品集团排班系统 (I105HB215) | 林君维(Chun-Wei Lin)、陈宏益(Hongyi Chen) | 2016.10 ~ 2017.05 |
| 石二锅设店规划 (I105MA178) | 林君维(Chun-Wei Lin) | 2016.09 ~ 2017.02 |
| 以利润最大化为目标下我国养猪产业摇篮到摇篮(C2C)之永续生产规划 (MOST 105-2221-E-224 -037) | 林君维(Chun-Wei Lin)、厐玉涓(PARNG YUH JIUAN) | 2016.08 ~ 2017.07 |
| 水足迹成本最小化之非等效平行机台生产排程-以染整业为例 (MOST 104-2221-E-224-027) | 林君维(Chun-Wei Lin)、厐玉涓(PARNG YUH JIUAN) | 2015.08 ~ 2016.07 |
| 以收益最大化为目标之工厂废热回收设备绿色设施规划 (MOST 103-2221-E-468 -031) | 林君维(Chun-Wei Lin)、厐玉涓(PARNG YUH JIUAN) | 2014.08 ~ 2015.07 |
| 以模糊商品力为竞争基础之成衣产业供应链管理 (NSC 102-2221-E-224-076) | 林君维(Chun-Wei Lin)、厐玉涓(PARNG YUH JIUAN) | 2013.08 ~ 2014.07 |
| 云端绿色碳粉匣C2C(摇篮到摇篮)环境建置与最佳再制生产规划 (NSC 101-2221-E-224 -053) | 林君维(Chun-Wei Lin) | 2012.08 ~ 2013.07 |
| 101年度全国技专校院办理具劳作教育及服务学习内涵课程绩优甄选暨观摩研讨会 (101-610) | 林君维(Chun-Wei Lin) | 2012.04 ~ 2012.12 |
| 县市艺文特色发展计画－圆梦尖兵布袋戏植根推广 (101-A309) | 林君维(Chun-Wei Lin) | 2012.04 ~ 2012.12 |
| 101年大专校院学生事务工作计画 (101-A017) | 林君维(Chun-Wei Lin) | 2012.03 ~ 2012.12 |
| 中区高等技职院校学生国际化交流暨合作发展愿景与促进计画 (100-J02-2) | 林君维(Chun-Wei Lin) | 2011.09 ~ 2012.12 |
| 灾区救援物资紧急配送规划 (NSC 100-2221-E-224-030) | 林君维(Chun-Wei Lin) | 2011.08 ~ 2012.07 |
| 台大医院健康管理中心行销计画案 (100-335) | 林君维(Chun-Wei Lin) | 2011.08 ~ 2011.11 |
| 100年度大专校院学生事务工作计画 (100-A048) | 林君维(Chun-Wei Lin) | 2011.08 ~ 2012.07 |
| 100年台湾青年国际志工服务队计画「心灵停泊站─尼泊尔服务团」(教育部) (100-A314) | 林君维(Chun-Wei Lin) | 2011.08 ~ 2012.07 |
| 100年台湾青年国际志工服务队计画「心灵停泊站─尼泊尔服务团」(青辅会) (100-A314) | 林君维(Chun-Wei Lin) | 2011.08 ~ 2012.07 |
| 100年度全国技专校院办理具劳作教育及服务学习内涵课程绩优甄选暨观摩研讨会 (100-611) | 林君维(Chun-Wei Lin) | 2011.07 ~ 2011.12 |
| 「净、省、水」-高效能灰水再利用省水系统设计开发计画 (NSC 100-2218-E-224-004) | 游元良(Yuanlian You)、林君维(Chun-Wei Lin) | 2011.06 ~ 2012.03 |
| 100年度多元就业开发方案-大专赁居服务访视人力 (100-A007) | 林君维(Chun-Wei Lin) | 2011.03 ~ 2011.08 |
| 鼎芮实业低温物流改善案 (99-394) | 林君维(Chun-Wei Lin) | 2010.10 ~ 2011.01 |
| 提升无线射频系统(RFID)标籤讯号读取效率之算法研究 (NSC 98-2221-E-224 -035) | 林君维(Chun-Wei Lin) | 2009.08 ~ 2010.07 |
| 光发纺织即时生产系统管理建置 (20161112202032) | 林君维(Chun-Wei Lin) | 2009.01 ~ 2009.12 |
| 建构高危险感染性医疗废弃物之模糊逆向运筹管理模式 (NSC 97-2221-E-224 -033) | 林君维(Chun-Wei Lin) | 2008.08 ~ 2009.07 |
| 97年度物流运作管理培训课程 (97-253) | 林君维(Chun-Wei Lin) | 2008.07 ~ 2008.12 |
| 健康照护创新服务计画－健康服务中心规划案 (97-244) | 林君维(Chun-Wei Lin) | 2008.06 ~ 2008.08 |
| 钜扬公司库存管理作业系统制作 (97-248) | 林君维(Chun-Wei Lin) | 2008.04 ~ 2008.07 |
| IC产业国际物流HUB个案 (97-168) | 林君维(Chun-Wei Lin)、吕明山(Mingshan Lu) | 2008.03 ~ 2008.09 |
| 育成中心中小企业进驻 (97-115) | 林君维(Chun-Wei Lin) | 2008.03 ~ 2008.12 |
| 经济部中小企业处补助创新育成中心计画 (97-A303) | 林君维(Chun-Wei Lin) | 2008.01 ~ 2008.12 |
| 育成中心中小企业进驻 (97-179) | 林君维(Chun-Wei Lin) | 2008.01 ~ 2008.03 |
| 云林县斗六市区路边停车收费民意调查 (96-362) | 林君维(Chun-Wei Lin) | 2007.11 ~ 2007.12 |
| 我国专科护理师甄审制度探讨之研究 (96-290) | 林君维(Chun-Wei Lin) | 2007.08 ~ 2007.11 |
| 整合供应商供货可获性与现场机器可获性之机动生产排程 (NSC 96-2221-E-224 -024) | 林君维(Chun-Wei Lin) | 2007.08 ~ 2008.07 |
| 教育部办理技专校院「发展学校重点特色专案计画」-「全球协同创新」菁英计画(第三期) (96-A048) | 林君维(Chun-Wei Lin) | 2007.04 ~ 2007.12 |
| 产业供应链上下游物流容器标准化研究 (96-248) | 林君维(Chun-Wei Lin) | 2007.04 ~ 2007.12 |
| 育成中心中小企业进驻 (96-115) | 林君维(Chun-Wei Lin) | 2007.01 ~ 2007.12 |
| 教育部「奖励大学教学卓越计画」—「全球化产业链管理学程」暨建立管理学院「先进产业电子化教学基础建设」 (20161113172858) | 林君维(Chun-Wei Lin) | 2006.08 ~ 2007.07 |
| 教育部办理技专校院「发展学校重点特色专案计画」-「全球协同创新」菁英计画(第二期) (95-A016,95TUMT-2) | 2006.01 ~ 2006.12 | |
| 教育部办理技专校院「发展学校重点特色专案计画」-「全球协同创新」菁英计画(第一期) (94-A028) | 2005.04 ~ 2005.12 | |
| 彰源企业股份有限公司-彰源公司一般干部能力养成训练 (94-226) | 2005.02 ~ 2005.12 |
| 课程类别 | 课程代码 | 课程名称 | 年度 |
|---|---|---|---|
| 大学日间部 | XBU00044A | 问题解决与自主学习 | 112 |
| 研究所博士班 | 98D00022B | 供应链管理专题 | 112 |
| 大学日间部 | XBU00036A | 英文演讲与国际礼仪(二) | 112 |
